{"id":4915,"date":"2012-12-27T14:44:27","date_gmt":"2012-12-27T14:44:27","guid":{"rendered":"https:\/\/inveske.co.uk\/raw-and-equipped-deads-and-lockouts\/"},"modified":"2012-12-27T14:44:27","modified_gmt":"2012-12-27T14:44:27","slug":"raw-and-equipped-deads-and-lockouts","status":"publish","type":"post","link":"https:\/\/www.mariliacoutinho.com\/pt-br\/raw-and-equipped-deads-and-lockouts\/","title":{"rendered":"Raw and Equipped, Deads and Lockouts"},"content":{"rendered":"

\"\"<\/a><\/p>\n

Having made my point that all forms of the art are equally legitimate, interesting and honorable<\/a>, I guess it\u2019s time to understand how different they are.<\/p>\n

Actually, this is just part of a much more complicated discussion, which is that each alteration done to a lift performed with a barbell produces a new lift, a new set of mechanical limitations, supercompensation profile and considering that each of the three power lifts is dealt with differently by each lifter (depending on things we have no idea about), we\u2019re not in any easy track.<\/p>\n

Let\u2019s stick to just a few differences between raw and equipped lifting. Let\u2019s restrict the discussion even more: let\u2019s stick to squats and bench presses (deadlifts are more mysterious animals, we\u2019ll deal with it later).<\/p>\n

During the squat, the lifter flexes the knee joints and the hip joint to the point of highest mechanical disadvantage (\u201cbreaking the parallel\u201d). For the moment, let\u2019s avoid calling them \u201ceccentric\u201d and \u201cconcentric\u201d phases, since so many concerted muscle actions are taking place that these terms over-simplify what is happening. The extension movements involved in resuming the upright position will suffer different limitations considering the knee joint torque and hip joint torque. For both joints, torque is at its maximum between 70o and 80o. The chief limitation for a squat\u2019s success, therefore, is the muscle strength needed in the extension kinetic chains at those angles.<\/p>\n

Both the knee wrap and the squat suit will decrease (how much more or less depends on the numerous possible combinations in equipment use, such as knee wraps only, suit only, both, different kinds of wraps, different types of suit, etc) the strength needed to overcome the external resistance at those angles. The equipment will be less and less effective as the body resumes the straight position to a point where the final effort, also known as \u201clockout\u201d, is very little aided by the equipment.<\/p>\n

We could safely say that the equipment transfers some (and \u201csome\u201d varies from a little to quite a lot) of the difficulty in overcoming the external resistance from the smaller to the widest angles, therefore, from \u201clifting off\u201d to \u201clocking out\u201d. Both the squat suit and the bench shirt, in very different ways, will do just that. The knee wraps with further enhance the lockout-emphasis effect.<\/p>\n

To master equipped lifting, one must work on many aspects of the technique and strength, but, above all, one must master the lockout. The most important assistance exercises target just that. It is easy to understand: once the lifter has perfect control over the lockout and has \u201cnegotiated\u201d over 100% loads with his\/her Central Nervous System, the lift is good to go.<\/p>\n

Raw lifting is, as Shawn Lattimer always said, \u201ca totally different animal\u201d. We\u2019re back to where we started this article, pointing out the angles in which the torques are the highest. The difficulty shifts back to the liftoff phase, instead of the lockout, unassisted phase for the equipped lifting.<\/p>\n

Unequipped lifters must master (be strong, stable, proficient) at the liftoff, above all. This is why all the assisted work with boards, chains and bands, regardless of their overall importance in powerlifting, are less important for the raw lifter, relatively speaking. They have their role, since everybody must lockout heavy and stable. But if they fail to liftoff, they won\u2019t get to lockout.<\/p>\n

That is where the deads come in: dead benching, dead squatting and all the assistance work targeting strength and control at the liftoff phase of the movement.<\/p>\n

I\u2019m still not even mentioning bar path, vertical versus inclined, eccentric control, speed \u2013 this is all important and subject for other articles.<\/p>\n

My objective here is to shed some light on the nature of differences in training protocols that may show to be helpful for equipped or unequipped lifters.<\/p>\n

 <\/p>\n

*ok, I’m not sure what’s going on with youtube: I know I embedded the right videos, but it keeps showing my last uploaded video. Please have patience: I’ll try to fix this.<\/p>\n

 <\/p>\n

(Dead squats – with wraps in the last sets, still training for “modern raw” at the time)<\/p>\n